Filoseal+ HD Fire Duct Sealing Kit 75 - 110mm

Product No: S83-0759

Filoseal+ HD Fire Duct Sealing Kit 75 - 110mm

FiloSeal+HD FIRE provides a strong support system using the fire resistant hexagonal blocks made of specially formulated material called 'Formite' which builds up like a honeycomb structure.

FiloSeal+HD FIRE is suitable for sealing empty or any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required.

The Filoform duct sealing system FiloSeal+HD FIRE uses fire-resistant MD+ sealant which is easily applied from a standard skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).

After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

FiloSeal+HD FIRE is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal blocks to support the cable and provide a strong backing for the seal

The unique design of the hexagonal blocks makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.

Fire resistant - tested to BS EN1366-3 2009
Fire resistant - tested to AS1530.4-2014 (Australian / New Zealand fire standard)
Tested to London Underground - LUL S1085
Tested to European rail applications - BS EN 45545-2:2013
Tested to French rail standard CIt NF F16-101
Tested to Smoke index - ISO 5659-2:2012
Tested to Oxygen index - BE EN ISO 4589-2:1999 (High Oxygen index)
WIMES Compliant (3.02 2013 6.4.3.2 b)
Flexible, one component fire resistant adhesive and sealing compound in a cartridge - (310ml)
Kits are complete with backing and mastic to fill an empty duct of the quoted kit size
High levels of Gas and Water tightness
Excellent adhesion, applicable to all common building materials
Resistant against Water, Alkaline, Chemical agents
Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
Resistant to Rats
Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
Non-corrosive
Solvent-free
Shock absorbing
Non-toxic, neutral and almost odourless
Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2)
Suitable for any shaped duct/borehole/opening
Quick and easy installation
A complete kit
Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
Engineered duct sealing solution
Suitable for renovations, can be installed retrospectively
Over 25 years of operational experience

Duct diamerter max: 110mm

Quick Links

£130.74 ex VAT

£156.89 inc VAT

Product Wishlist & Compare Placeholder

Free Standard Delivery over £100

Delivery cost calculated at checkout.

Quick Links

Full description

FiloSeal+HD FIRE provides a strong support system using the fire resistant hexagonal blocks made of specially formulated material called 'Formite' which builds up like a honeycomb structure.

FiloSeal+HD FIRE is suitable for sealing empty or any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required.

After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

The unique design of the hexagonal blocks makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.

Fire resistant - tested to BS EN1366-3 2009
Fire resistant - tested to AS1530.4-2014 (Australian / New Zealand fire standard)
Tested to London Underground - LUL S1085
Tested to European rail applications - BS EN 45545-2:2013
Tested to French rail standard CIt NF F16-101
Tested to Smoke index - ISO 5659-2:2012
Tested to Oxygen index - BE EN ISO 4589-2:1999 (High Oxygen index)
WIMES Compliant (3.02 2013 6.4.3.2 b)
Flexible, one component fire resistant adhesive and sealing compound in a cartridge - (310ml)
Kits are complete with backing and mastic to fill an empty duct of the quoted kit size
High levels of Gas and Water tightness
Excellent adhesion, applicable to all common building materials
Resistant against Water, Alkaline, Chemical agents
Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
Resistant to Rats
Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
Non-corrosive
Solvent-free
Shock absorbing
Non-toxic, neutral and almost odourless
Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2)
Suitable for any shaped duct/borehole/opening
Quick and easy installation
A complete kit
Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
Engineered duct sealing solution
Suitable for renovations, can be installed retrospectively
Over 25 years of operational experience